Primer - Intermediate

Durebild® STE

  • Can be applied over a wide range of well adhered aged coatings
  • Excellent barrier protection for steelwork
  • Ideal maintenance coating 
  • Maintains asset value 

Durebild® STE GF

  • Very long term durability in harsh and corrosive environments
  • High build formulation requires fewer coats to achieve specified film thickness
  • No primer required on blast cleaned steel
  • Cold cure hardener available for colder months

Durebild® STE MIO

  • Self priming coating saves time
  • Cold cure hardener allows application during colder months
  • Provides long term corrosion protection

Durekem® MPP

  • Suitable for the storage of a wide range of materials including aliphatic and aromatic hydrocarbons and petroleum products 
  • Protects assets against corrosion and degradation
  • High solids, lower solvent emissions
  • Self-priming finish, separate metal primer not required

Duremax® GFX

  • Excellent barrier for immersion or splash zone
  • Protects assets against corrosion
  • Protects assets against abrasion

Duremax® GPE

  • Fast Cure and Quickturn® hardeners available for faster recoat and rapid return to service
  • Versatile - can use in a wide range of applications
  • Protects steel against corrosion by barrier protection

Duremax® GPE MIO

  • Micaceous iron oxide pigmentation for added barrier protection
  • Easy to apply
  • Can apply in a range of varying climatic conditions

Duremax® HBE

  • Suitable for both steel and concrete in harsh chemical conditions
  • Easy to apply at high film builds
  • High build one coat protection

Duremax® MBE

  • Ideal for use in environments where fast drying or rapid recoating is required
  • Compatible with a wide range of primers and topcoats

Ferreko® No. 3

  • Versatile - can be used as intermediate or topcoat
  • Long service life 
  • Helps prevent corrosion 

Ferreko® No. 4

  • Versatile - can be used direct to suitability prepared metal
  • Fast return to service for a high build MIO filled epoxy coating
  • Extends maintenance cycle with excellent barrier protection properties 

Ferreko® No. 6

  • Very long case histories across Australia
  • Single pack convenience

Ferreko® 810

  • Excellent long-term durability
  • Single pack convenience
  • Easy to apply
dulux luxafloor eco2 - low build, water borne, two-pack epoxy floor paint

Luxafloor® ECO2

  • Can be used in projects where low VOC coatings are required.
  • Ideal for projects where limited time is available for shut downs
dulux luxafloor lge - high-solids, semi-gloss epoxy floor paint

Luxafloor® LGE

  • Easily transforms bare concrete floors 
  • Easy application by roller
  • Choice of smooth or slip resistant finishes
dulux luxafloor wb - low build, water borne, two-pack epoxy floor paint

Luxafloor® WB

  • Gloss finish that is easy to clean
  • Suitable for commercial car parks

Luxepoxy® UHB

  • Will not taint foodstuffs
  • Ultra low solvent, and does not require thinning
  • Can achieve up to 5,000-microns in a single coat by spray

Submit an enquiry

Find a Store

Subscribe