Filter by
Showing 6 of 7 Projects
Off-Shore
Anderson Point Wharf Remediation, WA
Project Spotlight
WA
The durability of steel supports at Anderson Point Wharf in Port Hedland through ongoing remediation works and protective coating application for long-lasting infrastructure integrity across its 306-metre length.
Off-Shore
Barrow Island Dolphins, WA
WA
These steel dolphins were spray painted in Luxepoxy UHB before being taken to Barrow Island and erected. As the steelwork is subject to an extremely corrosive marine environment, sacrificial protection is inadequate, therefore high performance barrier protection is required.
Off-Shore
Bunbury Lighthouse, WA
Project Spotlight
WA
A protective coatings system was designed to suit Bunbury Lighthouse's harsh coastal location and distinctive chequered exterior.
Off-Shore
Cape Naturaliste Lighthouse, WA
Project Spotlight
WA
More than 100 metres above sea level, the Cape Naturaliste Lighthouse is one of the most popular attractions in WA’s Margaret River Region. Due to its' proximity to the coast the repaint of it's steel surfaces needed to withstand a highly corrosive environment.
Off-Shore
Pilbara Ports Berth 3, WA
Project Spotlight
WA
At the Port of Port Hedland, PCM Group applicators raced against one of Australia's largest tide changes to recoat the steel piles supporting Berth 3. Dulux® Duremax® GFX delivered superior corrosion resistance in a single coat.
Image courtesy of PCM Group.
Off-Shore
Princes Wharf, NZ
NZ
The Princes Wharf Auckland is subject to a marine environment, and therefore requires a heavy duty 3 coat system comprising Zincanode 402 zinc rich epoxy, Duremax GPE MIO epoxy intermediate coat with micaceous iron oxide and Weathermax HBR two pack polyurethane.
