APEXIOR® No. 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. APEXIOR® No. 1 is the recommended coating for boiler tubes and timber kilns. APEXIOR® No. 1 is resistant to continuous immersion in boiling water and steam from 95°C to 370°C. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. APEXIOR® No. 1 prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tool cleaned areas. Equipment coated with APEXIOR® No. 1 will also see an increase in heat transfer efficiency. APEXIOR® No. 1 performs ideally with water treatment in steam generating equipment.
Recommended uses for APEXIOR® No. 1 are steam generating equipment, hot condensate return tanks, de-aerators, hot process tanks, autoclaves, sterilizing equipment, mud and steam drums and steam traps.