Durebild® STE GF

Durebild® STE GF

DUREBILD STE® GF has been developed specifically for Australasian conditions using advanced epoxy technology and incorporates glass flake for additional barrier protection and abrasion resistance.

DUREBILD® STE GF can be topcoated with a wide range of coating types and is available with a bloom-free cold cure hardener.

APAS 2973 and 2973F assessed and confirmed to meet all requirements on specific certified products. 

Uses

DUREBILD STE® GF is principally used as a high build, heavy duty barrier coating over power tool or high pressure water cleaned surfaces where blasting is impractical or not allowed.

This coating can also be used for new work as a high performance intermediate coat.

The glass flake formulation is suitable for fresh and salt water immersion over abrasive blast cleaned steel.

Benefits

  • Very long term durability in harsh and corrosive environments
  • High build formulation requires fewer coats to achieve specified film thickness
  • No primer required on blast cleaned steel
  • Cold cure hardener available for colder months

Features

  • Excellent surface wetting properties and corrosion resistance
  • High performance maintenance coating for new or existing steel
  • Excellent barrier for immersion or splash zone
    Ideal maintenance coating over most well adhered aged coatings
  • Self-priming finish
  • Can be applied up to 500-microns DFT in a single coat
  • Good abrasion resistance