Apexior® No. 1
Apexior® No. 1
APEXIOR® No. 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service.
APEXIOR® No. 1 is the recommended coating for boiler tubes and timber kilns.
APEXIOR® No. 1 is resistant to continuous immersion in boiling water and steam from 95°C to 370°C. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment.
APEXIOR® No. 1 prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tool cleaned areas.
Equipment coated with APEXIOR No. 1 will also see an increase in heat transfer efficiency.
APEXIOR® No. 1 performs ideally with water treatment in steam generating equipment.
Uses
Recommended uses for APEXIOR® No. 1 are steam generating equipment, hot condensate return tanks, de-aerators, hot process tanks, autoclaves, sterilizing equipment, mud and steam drums and steam traps.
Benefits
- Air dries, easy to apply
- Single pack
- Excellent wettability properties – surface tolerant
- Easily recoatable
- Resistant to boiling water/steam to 370°C
- Increases heat transfer efficiency
- Outstanding resistance to thermal shock (immersion)
- Inert to water treatment
- Prevents corrosion in standby service
- Prevents scale buildup
Features
- Performance range 95°C to 370°C
- Simple one pack self-priming topcoat
- Ideal coating for use under hot insulation when moisture is present
